1650 Laser System Controllers.1650激光系统控制器。The LSC unit has additional connections for q-switch triggering, external triggering, sync output and additional I/O. The q-sw trigger has an adjustable delay referenced off the falling edge of the pulse control signal. This allows for optimum adjustment of triggering a q-switch driver. The external trigger input allows the LSC to be externally triggered via an external source. Rising and falling edges can be selected as well as various modes. The additional I/O connector offers additional signals: photodiode input, two thermistor inputs, a 0-10V analog output, a 0-5V analog input, and 3 TTL inputs that can be monitored..LSC单元具有外的接开关发外发同步出和外的I / O Q-SW发具有可延的参的冲控制信号的下沿。允发Q动器的优化整。外发入允LSC是外发外源。上升和下沿可以择以及各种模式。外的I/O接器提供外的信号光电二极管的入两热敏电入一个模拟出0-10V0-5V模拟入和3个TTL入可监控。12 bit resolution on current setting.在当前置12位分率。Single shot, continuous, burst and CW modes.单次续突发和续模式。Repetition rates from 0.1 Hz to 100 KHz (50KHz in Q-sw mode).复率从0.1兹到100千Q-SW模式在50kHz。Q-switch Trigger Delay control with /-6.5ms adjustment range and 200ns resolution.-6.5ms /整围和200ns分率Q开关发延时控制。Sync Output referenced to diode or Q-switch control pulses.同步出参二极管或Q开关控制冲。External Trigger – Start, stop, start/stop, gate and rising or falling edge modes.外发启动停止启动/停止上升或下沿模式。Additional I/O photodiode, thermistor inputs and 0-10V analog output.外的I / O光电二极管热敏电入10V的模拟出。5 setup storage locations5置存储位置